So i followed the manual and found out ho to get this working but I can not find out the right value for the cursor.
I try to change value mapping parameters but I can not get it to go from the normal 0 to 127 midi values. My only solution by now was to zoom out allot and create huge circles/lines to get some little advantage from the cursor_value function on a cc midi message. But my controlled midi stuff is affected only by a few midi steps. (hope you get the point trough my poor words)
I must say that i’m new at osc stuff and not so quick with coding.
Is there a way to get sense of it with the graphic interface? If so Iannix will become my most loved sequencer in the software domain. Great also to pilot analogue stuff via midi.
Hope you can help and keep on moving!
Have a look at the documentation Reference sections on Cursors, under the Mapping heading.
You can set the target range to the desired MIDI range, say 0 to 127. Then the message variables cursor_value_x, etc go over this range rather than 0 to 1.
You can set up the remapping of cursor x and y target ranges in the user interface with the Inspector. Select the desired cursor in the workspace, and in the Inspector change the « Value Mapping » « To » values from their default of 0 1 1 0 to the desired midi ranges for the x axis and the y axis. e.g. For cursor_value_x to run from 40 to 120 and cursor_value_z to run from 0 to 127 set the « to » value to 40 120 127 0.
I hope this explanation is clear enough. Let me know if you need more help.
Seems clear now thanks allot!
I really wanted to send a small word to say thanks to you for the fantastic points you are writing on https://www.iannix.org. My time-consuming internet lookup has at the end been honored with extremely good ideas to exchange with my pals. I ‘d express that many of us site visitors actually are extremely endowed to exist in a notable community with so many lovely individuals with useful points. I feel really fortunate to have used your webpage and look forward to so many more fun moments reading here. Thanks a lot again for a lot of things. Best regards
Thanks a lot 🙂 !
Hi there, I am trying to control an on screen mouse cursor and key presses via either OSC or MIDI with the aim of controlling a computer game with musical instruments and other HID devices. Would I be able to do that with this software or is the topic here about controlling MIDI with a cursor (ie. other way around)? Thanks.