1. What is IanniX?
  2. Download
  3. Showcase
  4. Research
  5. About

Send 0 after curve finished

Home › Forums › Making things with IanniX › Send 0 after curve finished

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • 20 August 2013 at 18 h 16 min #3212
    Anonymous
    Guest

    Hi,

    I’m new to Iannix, I’m working on a piece and have a problem.
    The piece is basically a score with many curves and a global linear timeline to scan all curves at once.
    I’m sending the Y-Value of a curve to a PD-Patch where each curve controls a OSC with the Y-Value representing the frequency in Hz.
    This is working quite well, what i need to do is – when a curve is finished – scanned to an end, it should send out a 0, so that the OSC stops generating sound… How can i managed that?

    Thanks and best regard
    Damian

    20 August 2013 at 18 h 24 min #3213
    IanniX
    Keymaster

    Hi!

    First, thanks for using IanniX :). Then, it’s a common problem that we never solved because it’s not so easy to create the right solution.

    Maybe the best thing would be to put a trigger just at the end of the curve, this trigger can send “fake” cursor values (=> double-clic on the trigger to change its message, then select “Default OSC Message for cursors” and edit values). Is it an acceptable solution?

    20 August 2013 at 19 h 04 min #3214
    Anonymous
    Guest

    thank you for your answer!
    I thougt about triggers, but it will be around 300+ curves, adding the same amount of triggers makes it quite a huge project 😉
    But if there isn’t a “automated” solution, I think I will have to do so…

    20 August 2013 at 19 h 06 min #3215
    IanniX
    Keymaster

    And what about making that in PD => for each abstraction of each curve, if no frequency update during 40ms (eg.), stop the oscillator (as we did in our Max patch)?

    22 August 2013 at 12 h 33 min #3216
    Anonymous
    Guest

    Hi,

    I will try this… Which example are you talking about, the Max Sound Example? How do you exactly managed that gate?

    Thanks.

    22 August 2013 at 18 h 49 min #3217
    IanniX
    Keymaster

    Yes, the “gate” is in the poly~ subpatch (synthetizer.maxpat), using the adsr~ object to release gain after xxxx ms of inactivity

    22 August 2013 at 22 h 26 min #3218
    Anonymous
    Guest

    Thanks, this worked Out! Even a delayed triggerd 0 had worked, but with a ADSR the Release can fade it out… Thanks again!

    23 August 2013 at 11 h 04 min #3219
    IanniX
    Keymaster

    Nice!

    23 August 2013 at 19 h 34 min #3220
    Anonymous
    Guest

    Yes I’m very happy, the conecert is in less than a month, now I’m glad everything is working as planned 🙂

    Thanks alot again! 🙂

    25 August 2013 at 16 h 26 min #3221
    IanniX
    Keymaster

    If you plan to make recordings, photos or if you have Facebook events or URLs to share about this concert, don’t hesitate (through FB message or contact@iannix.org), we’re always glad to receive works from our users!

    26 August 2013 at 11 h 03 min #3223
    Anonymous
    Guest

    Sure, I will send you informations, thanks 🙂

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Making things with IanniX’ is closed to new topics and replies.

© IanniX Association

What is IanniX? | Download | Showcase | Forums | Research | About