Sine bank in Iannix (Additive synthesizer)

Home Forums Feedback Sine bank in Iannix (Additive synthesizer)

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #5656 Reply
    H.H. Alejandro
    Guest

    Hello again! A desired feature would be to add a Sine bank into Iannix, I´ve tested Iannix as an additive synthesizer with pure data, but it was tricky and difficult to do and a lot of problems came out and needed lots of help, and maybe you can do it better.
    It is ideal to have 100 cents per second in Y or 1000, or 10000 notes between semitones in Y (a 1000 notes per second in Y), this way it is even and easy for music making and calculation(If i want a half tone plus 28 cents, i would put the note or curve at 1.28Y). One problem I had when testing was that the sine wave was still sounding when the triggers duration had ended or when the curve had ended.
    I made this with OSC, and the way I mapped it was so that I got 128 notes on 128 seconds in Y, it is perfect this way for music making, and I got a pretty big sound range from bottom to top by stacking sinewaves with full volume at the lower notes and less volume at the top.
    I hope you could integrate this because I still have unwanted sounds when playing with different sinewaves at different volumes.
    Thank you so much, Alejandro.
    (It is perfect to have a semitone for each second in Y).

    #5657 Reply
    H.H. Alejandro
    Guest

    Also, It is neat to map the notes volume in Z dimension. Whether it is a trigger or a glissandi curve changing in z.

    #5658 Reply
    H.H. Alejandro
    Guest

    And maybe you could make it so that instead of stacking several curves to get sound from lowest to top, you would only need one curve/note.

    #5659 Reply
    H.H. Alejandro
    Guest

    So basically the way the cursor is configured now but with sinewaves integrated (same notes would be there).

    #5725 Reply
    H.H. Alejandro
    Guest

    So again, 100 cents, or 1000 notes in between semitones, for example Y=0 could be C4, Y=1 would be C#4, and in between those notes 100 cents or 1000 notes or maybe even 10000. Even like that for better understanding of microtones and half tones.

    #5842 Reply
    hhalejandro
    Guest

    hello again, so both curves and triggers would be used, curves would work as glissandi, the sound of the sine waves would last what you put in trigger duration, and the curve or glissandi´s sound would last as long as the cursor is touching the curve, when there is no more curve, the sound would stop.
    Thank you so much.

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Reply #5725 in Sine bank in Iannix (Additive synthesizer)
Your information:





© IanniX Association

What is IanniX? | Download | Showcase | Forums | Research | About