Send Iannix Frequency

Home Forums Wanted! Send Iannix Frequency

This topic contains 2 replies, has 2 voices, and was last updated by  Pándinus 2 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3759 Reply

    Pándinus

    Hello, is there a way to send the information of Iannix´s curves by frequency to pure data, to send frequency´s value information to pure data. On pure data I want frequency values to go to the oscillator and I want those values to be the frequency values that the Iannix curve is sending, so there would have to be a link of frequency between iannix and pure data or a traduction of osc to frequency and then link to the oscillator in pure data, many thanks!
    128 values (C-2 to G8)are sent from 0 to 1 (osc), but I want continuum resolution, the max amount of frequency between those numbers, and that frequency to be played on the pure data oscillator according to the way the iannix curve is moving.
    THANK YOU.

    #3761 Reply

    IanniX
    Keymaster

    Hi! If you want a continuum, you can’t use MIDI. MIDI is designed for notes and weak continuums (128 values). You have to use OpenSoundControl with udpreceive object. You have one example in IanniX patches folder.

    #3817 Reply

    Pándinus

    Thank you.

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Send Iannix Frequency
Your information:





© IanniX Association

What is IanniX? | Download | Showcase | Forums | Research | About